Lexer Research, Inc. has been promoting an industrial human resource development program (LeMMI 4.0) in Indonesia through JICA’s SDGs program with cooperation with the Indonesian Ministry of Industry (BPSDMI) since 2019.

　On July 27, 2021, an opening ceremony was held to commemorate the start of the human resource development program and the arrival of the equipment to be used for the training at the STMI Jakarta National Technical College in Indonesia. The ceremony was attended by Minister Agus from the Indonesian Ministry of Industry, Director General Arus from BPSDMI, Ambassador Heri of Indonesia to Japan, and Ambassador Kanasugi of Japan to Indonesia.

　From October 2021 or later, a second unit is scheduled to be installed at the Center for Industrial Digital Innovation (PIDI 4.0), and training will continue to be conducted both online and offline, depending on the status of COVID-19.　

　LEXER will also continue to develop our digital manufacturing human resource training program for Indonesian industry called “LeMMI 4.0” to spread our digital engineering technology and engineering skills to Indonesian industry, and to improve the skills and educate lean manufacturing in the Indonesian manufacturing industry from both industry and academia perspectives.

Press（PDF）

Speech from the Indonesian Minister

Learn more about GD.findi, click here.

<p>The post The opening ceremony of the digital engineering course was held with the Indonesian Minister of Industry. first appeared on GD.findi │No-Code, Model-Based Manufacturing Simulation​.</p>

　Lexer Research Inc. has been promoting industrial human resource development in Indonesia by utilizing the JICA SDGs program from FY2019. As the second phase of the project research project in this project, we will start a dissemination demonstration activity in collaboration with the Ministry of Industry of Indonesia this year. Here, the Industrial Human Resources Development Agency (BPSDMI), which is one of the agency inside the Indonesian Ministry of Industry, will serve as a counterpart to provide in-service education and student education in the manufacturing industry.

　We are developing a digital manufacturing human resources education program for the Indonesian industry called “LeMMI 4.0”, and we will promote the practical development of this human resources development program.

　Specifically, from July 26, a course to learn digital engineering and lean automation to advance the Indonesian manufacturing industry will be held at the Polytechnic STMI Jakarta under the guidance of BPSDMI. Here, by utilizing our production simulator GD.findi, We provide a place to learn the advanced design of production system, the waste elimination in production lines, the productivity improvement, and engineering methods to improve overall equipment effectiveness (OEE). In addition, we will transfer equipment for learning LCA (Low Cost Automation) from Japan to Indonesia for practical education.　

　In the future, after conducting instructor education through ToT (Training of Trainer), we plan to implement in-service education and student education in cooperation with the trained instructors.
　Through this project, we will disseminate our digital engineering technology and engineering skills to the Indonesian industry and support the skill improvement of the Indonesian manufacturing industry.

Press（PDF）

Learn more about GD.findi, click here.

<p>The post Started The Human Resources Development Course of Digital Manufacturing (LeMMI 4.0) in collaboration with BPSDMI – Indonesian Ministry of Industry first appeared on GD.findi │No-Code, Model-Based Manufacturing Simulation​.</p>

　LEXER RESEARCH. Inc has been working with Fraunhofer IPA since 2018 to provide LEXER RESEARCH’s production system simulator “GD.findi” to support Virtual Fort Knox. Virtual Fort Knox is a cloud platform developed by the Fraunhofer IPA to realize Industry 4.0.

　The purpose of this project is to integrate Virtual Fort Knox’s technology and GD.findi with the Manufacturing Service Bus (MSB), a software integration service, to realize optimized daily production planning simulation and digital real-time PDCA cycle.

The cloud service being developed in this project introduced in the “Cloud Mall”, an initiative by the government of Baden-Württemberg to promote cloud technology. (https://cloud-mall-bw.de/praxispiloten/) This cloud service runs on Virtual Fort Knox’s cloud platform with GD.findi as the internal optimization engine and works with actual facilities.

As a cloud service for a manufacturing industry that combines LEXER RESEARCH’s simulation technology with the German public cloud platform, we will contribute to achieve Industry 4.0 and introduce cyber-physical systems to the manufacturing industry in Germany.

Press Realese（PDF）

Product introduction page of production system simulator GD.findi
http://www.lexer.co.jp/en/product/gd_findi

<p>The post The cloud service developed by LEXER RESEARCH, Fraunhofer IPA, and Virtual Fort Knox was introduced at the Cloud Mall of Baden-Württemberg. first appeared on GD.findi │No-Code, Model-Based Manufacturing Simulation​.</p>

Old site :http://www.lexer.co.jp/en
New site :https://www.lexer.co.jp/en

*It will be automatically redirected from the old URL to the new URL.

For customers who have saved our website as a “Favorite” or “Bookmark”, please update the settings.

<p>The post Notice of the Website Address (URL) Change first appeared on GD.findi │No-Code, Model-Based Manufacturing Simulation​.</p>

　LEXER RESEARCH. Inc has been working with Fraunhofer IPA since 2018 to provide LEXER RESEARCH’s production system simulator “GD.findi” to support Virtual Fort Knox. Virtual Fort Knox is a cloud platform developed by the Fraunhofer IPA to realize Industry 4.0.

　The purpose of this project is to integrate Virtual Fort Knox’s technology and GD.findi with the Manufacturing Service Bus (MSB), a software integration service, to realize optimized daily production planning simulation and digital real-time PDCA cycle.

　The cloud service being developed in this project introduced in the “Cloud Mall”, an initiative by the government of Baden-Württemberg to promote cloud technology. (https://cloud-mall-bw.de/praxispiloten/) This project was presented at High Tech Summit 2020 in Germany, and LEXER RESEARCH and Virtual Fort Knox gave a presentation about an overview of the service, the technology, and the effect of the project.

As a cloud service for a manufacturing industry that combines LEXER RESEARCH’s simulation technology with the German public cloud platform, we will contribute to achieve Industry 4.0 and introduce cyber-physical systems to the manufacturing industry in Germany.

Press Realese（PDF）

Product introduction page of production system simulator GD.findi
http://www.lexer.co.jp/en/product/gd_findi

<p>The post The cloud service developed by LEXER RESEARCH, Fraunhofer IPA, and Virtual Fort Knox was presented at High Tech Summit 2020. first appeared on GD.findi │No-Code, Model-Based Manufacturing Simulation​.</p>

JICA’s SME / SDGs business support project matches the development needs of developing countries with the excellent products and technologies of Japanese private companies, aims to solve the issues faced by businesses and developing countries that contribute to the achievement of the SDGs (SDGs business), and strengthen bilateral relations and further promote economic relations through ODA. This time, Lexer Research’s efforts have been adopted as a dissemination / demonstration / commercialization project (SME support type).

Since December 2019, LEXER RESEARCH Inc. together with the Ministry of Industry of Indonesia has been promoting a digital engineering HRD program for the introduction of digital engineering technology and cyber-physical systems and the establishment of their implementation system, with the aim to strengthen and promote lean production in Indonesia. In Indonesia, the Making Indonesia 4.0 policy is underway to promote the digitization and automation of industries with the aim of breaking away from the labor-intensive industrial structure and transforming into high-value-added industries. However, in Japan, the issue is how to build a foundation system for realizing these, and, how to promote digital HRD. In response to these needs, Lexer Research Inc. has been conducting FS activities on digital HRD by utilizing the production system simulator “GD.findi” since Dec. 2019 through the JICA SDGs Project.

The adoption of this dissemination / demonstration / commercialization project (supporting SMEs) further promotes the activities so far, and in collaboration with the Ministry of Industry of Indonesia, will demonstrates this education program at educational institutions in Indonesia, and at the same time, will disseminate this educational concept and engineering technology to Indonesian industry. Here, taking advantage of the characteristics of the cloud service “GD.findi”, we will introduce it to a wide range of industries in the future while cooperating with local introduction support organizations and instructors.

Through efforts to introduce digital engineering technology, cyber-physical systems and Japanese-style manufacturing methods to the Indonesian industry, and to build a system for producing digital engineering human resources, We will contribute to the support of Indonesia’s Making Indonesia 4.0 policy, the strengthening of cooperation between Indonesia and Japan, and the achievement of the SDGs.

*Contact

Please contact us from the following.

・Inquiry form http://www.lexer.co.jp/en/inquiry/

・email info@lexer.co.jp

*Related Links

・Product introduction page of production system simulator GD.findi

http://www.lexer.co.jp/en/product/gd_findi

・(News Release) JICA Decided to Adopt the 1st “SME / SDGs Business Support Project” in 2020

https://www.jica.go.jp/press/2020/20200924_10.html

・(Detailed information) Dissemination / demonstration / commercialization business (SMEs support type)

https://www.jica.go.jp/priv_partner/activities/smebvs/index.html

<p>The post LEXER RESEARCH’s proposal was adopted by JICA’s “SME / SDGs Business Support Project” first appeared on GD.findi │No-Code, Model-Based Manufacturing Simulation​.</p>

Many preparations have been made so far, and now, it’s time to begin.

LEXER RESEARCH Inc. will conduct a program to train the digital engineering personnel using GD.findi production simulator, in order to promote the effectiveness of lean production in the manufacturing industries in Indonesia.

Starting from August 24, a ToT (Training of Trainer) program will be held in collaboration with the Indonesian Ministry of Industry. In spite of the corona fiasco, we will promote this program with great expectations and support from Indonesia’s Ministry of Industry.

Through these activities, we will strive to strengthen the international cooperation between Japan and Indonesia and to establish Japan’s presence in Asia.

<p>The post LeMMI4.0, (Lean MONOZUKURI for Making Indonesia 4.0) is ready to start. first appeared on GD.findi │No-Code, Model-Based Manufacturing Simulation​.</p>